The power
Spy detects the presence of 60 volts on any active or passive device.
The installation is very simple in that you remove the 5/8-24 port
plug and replace it with the “Power Spy”
Features:
Bandwidth 5MHz to 1GHz
RFI Shielding >-100dB
Invisibly to RF signals as they are filtered
by the “Power Spy”
Glass epoxy PCB (FR4-G10)
High quality Red LED
Reduces down time as there is no need to open
passives to check the fuses
Full brightness achieved with a minimum of 30VAC
Operating current 0.6mA (nominal)
Return Loss >19.5dB
Operating temperature -30C to +70C
Perturbation characteristics:
(5 - 300MHz) +/- 0.2dB
(600 - 600MHz) +/- 0.5dB
(600 - 1GHz) +/- 1.0dB
Minium screw depth 17.7mm
CE approved
RMS Communications Inc., 11516 Downs Road, Pineville, North Carolina.
28134 USA Toll Free: 1-800-223-8312 -Phone (704) 588-4008